|
BLH3500 - Blade mCP X RTF
$169.99
Currently out of stock
Contact us to order this item
|
|
|
|
|
|
|
|
|
|
Overall user Rating: (Unrated)
|
|
|
Key Features- Integrated flybarless unit increases stability, control and power, providing the user the ultimate ultra-micro heli experience for indoor and outdoor use.
- Capable of maneuvers such as inverted hover, loops, flips, rolls, funnels, and hurricanes.
- Very low discloading results in high maneuverability and good collective response.
- Lightest heli in its class.
- Two sets of blades included, fast-flight and high-performance.
- Robust, long-lasting dual-ball bearing supported linear cyclic servos.
- Two high-performance flight batteries included.
OverviewThis helicopter will give transitioning pilots a more agile and capable collective pitch heli that will give them the confidence to master indoor aerobatics without the hesitance which comes with a larger outdoor only platform. Not to mention the cost makes it much more economical when learning.
It comes out of the box 100% factory built and equipped with a factory-installed Flybarless 3-in-1 Control Unit with Spektrum 2.4GHz DSM2 receiver, ESCs, and gyros. A ready-to-fly version with 2.4GHz DSM2 transmitter and a Bind-N-Fly version without transmitter, for those who already own a DSM2 aircraft transmitter, are available. Both variations include two 1S 200mAh 25c batteries, single port charger with AC adapter and a 1s High Current Ultra-Micro Battery Adapter Lead.
Using an integrated Flybarless system, the heli to gets up in the air without a mechanical flybar. The benefits of this system provides reduced drag on the main rotor head which results in more power, longer flight times, and provides the pilot the best of both worlds between stability and agility.
The Ready to Fly helicopter comes with the DX4e. The helicopters' software has been designed to be used with the DX4e, DX5e, DX6i, DX7 and DX8 transmitters, while allowing commonly used collective pitch functionality such as throttle hold or stunt mode. Needed to CompleteNo additional equipment is required to complete your Blade mCP X. Detailed InformationManuals- Click HERE to complete the Blade mCP X Main Rotor Head Replacement Request form.
- Horizon will pay for ground shipping within the United States and Canada.
- Consumers outside the US and Canada should contact their local retailer or distributor, which may be found HERE .
- If you have any questions, you can call Horizon Hobby Product Support at 877-504-0233.
Click HERE to see instructions on how to install your blade grips We apologize for this inconvenience. Horizon disclaims all liability and warranties for any consumer failing to act upon this product bulletin. | Blade mCP X Supplemental Pre-Flight ChecklistYour Blade mCP X is a high-performance collective pitch helicopter with a rotorhead that is much more complex than that of most of the ultra micro helicopters you may have flown before. Unlike the rotor heads of most fixed pitch ultra micro helis, the mCP X rotor head has many more moving parts that require thorough inspection before every flight. Following the steps in this supplemental checklist will help you avoid unsafe flying conditions and keep your mCP X performing at its best.
Click Here to see the Supplement DSMX Transmitters Operating in DSM2 Mode Bulletin DSMX transmitters operating in DSM2 modeThe Spektrum Team has been investigating sporadic reports from DSMX transmitter owners using their products in DSM2 mode. We have discovered that in some rare instances, DSMX equipped transmitters with the Product ID (PID) within this bulletin, may have a backwards compatibility issue that could cause a "hold" with the following superseded DSM2 receivers: AR500, AR6100, AR6100E, AR6110, AR6110E, AR6200 and AR6300.
Note: This bulletin does not apply to DSM2 only transmitters.
If you have a DSMX transmitter with one of the following PIDs, please complete the Transmitter Service Request Form to receive a prepaid shipping label to send your transmitter to Horizon Hobby for a free firmware update. - Click HERE to complete the Transmitter Service Request Form. Only one form is needed per customer (even with multiple transmitters) please check all boxes that apply and make comments in the Notes field).
- Horizon will pay for ground shipping within the United States and Canada.
- If you purchased your product outside the US and Canada, contact your local retailer or distributor. A list of International distributors may be found HERE.
- If you have further questions in the United States, please call Horizon Hobby Product Support at 877-504-0233.
The PID is located in the battery compartment of your transmitter. 
Transmitters with affected PIDs may be found in the following products:
Blade mCP X RTF (BLH3500), E-flite Apprentice 15e RTF (EFL2725), Hangar 9 Alpha 40 DSM2 RTF (HAN4400) ,Hangar 9 P-51 Mustang MkII PTS RTF (HAN4425), Hobbyzone Super Cub DSM RTF (HBZ7400), ParkZone Radian RTF (PKZ4700), ParkZone P-51D BL DSM RTF (PKZ2200), ParkZone F4U Corsair RTF (PKZ4600), Phoenix R/C Pro Simulator 3.0 with DX5e (RTM30R5510/RTM30R55101).
DX6i/DX5e/DX4e:
PID's beginning with one of the following prefixes: HS, HH, HT, HE, HA
DX8:
PID's beginning with one of the following prefixes: HS, HH, HT, HE, HA, HO, HM, HR
DX7:
PID's beginning with the following prefix: HA
JRP9503/JPR9309:
PID's beginning with the following prefix: TM
Click Here to see Frequently Asked Questions about the DSM2 mode Bulletin
We apologize for this inconvenience. Horizon disclaims all liability and warranties for any consumer failing to act upon this product bulletin. Always check your transmitter and equipment prior to each flight.
Manuals
Warranty
What is Not Covered
This warranty is not transferable and does not cover (i) cosmetic damage, (ii) damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or due to improper use, installation, operation or maintenance, (iii) modification of or to any part of the Product, (iv) attempted service by anyone other than a Horizon Hobby authorized service center, or (v) Products not purchased from an authorized Horizon dealer.
OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON MAKES NO OTHER WARRANTY OR REPRESENTATION, AND HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT WILL SUITABLY MEET THE REQUIREMENTS OF THE PURCHASER’S INTENDED USE.
Purchaser’s Remedy
Horizon’s sole obligation and purchaser’s sole and exclusive remedy shall be that Horizon will, at its option, either (i) service, or (ii) replace, any Product determined by Horizon to be defective. Horizon reserves the right to inspect any and all Product(s) involved in a warranty claim. Service or replacement decisions are at the sole discretion of Horizon. Proof of purchase is required for all warranty claims. SERVICE OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY.
Limitation of Liability
HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY, REGARDLESS OF WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER THEORY OF LIABILITY, EVEN IF HORIZON HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Further, in no event shall the liability of Horizon exceed the individual price of the Product on which liability is asserted. As Horizon has no control over use, setup, final assembly, modification or misuse, no liability shall be assumed nor accepted for any resulting damage or injury. By the act of use, setup or assembly, the user accepts all resulting liability. If you as the purchaser or user are not prepared to accept the liability associated with the use of the Product, purchaser is advised to return the Product immediately in new and unused condition to the place of purchase.
Law
These terms are governed by Illinois law (without regard to conflict of law principals). This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Horizon reserves the right to change or modify this warranty at any time without notice.
WARRANTY SERVICES
Questions, Assistance, and Services
Your local hobby store and/or place of purchase cannot provide warranty support or service. Once assembly, setup or use of the Product has been started, you must contact your local distributor or Horizon directly. This will enable Horizon to better answer your questions and service you in the event that you may need any assistance. For questions or assistance, please direct your email to productsupport@horizonhobby.com, or call 877.504.0233 toll free to speak to a Product Support representative. You may also find information on our website at www.horizonhobby.com.
Inspection or Services
If this Product needs to be inspected or serviced, please use the Horizon Online Service Request submission process found on our website or call Horizon to obtain a Return Merchandise Authorization (RMA) number. Pack the Product securely using a shipping carton. Please note that original boxes may be included, but are not designed to withstand the rigors of shipping without additional protection. Ship via a carrier that provides tracking and insurance for lost or damaged parcels, as Horizon is not responsible for merchandise until it arrives and is accepted at our facility. An Online Service Request is available at http://www.horizonhobby.com under the Support tab. If you do not have internet access, please contact Horizon Product Support to obtain a RMA number along with instructions for submitting your product for service. When calling Horizon, you will be asked to provide your complete name, street address, email address and phone number where you can be reached during business hours. When sending product into Horizon, please include your RMA number, a list of the included items, and a brief summary of the problem. A copy of your original sales receipt must be included for warranty consideration. Be sure your name, address, and RMA number are clearly written on the outside of the shipping carton.
NOTICE: Do not ship LiPo batteries to Horizon. If you have any issue with a LiPo battery, please contact the appropriate Horizon Product Support office.
Warranty Requirements
For Warranty consideration, you must include your original sales receipt verifying the proof-of-purchase date. Provided warranty conditions have been met, your Product will be serviced or replaced free of charge. Service or replacement decisions are at the sole discretion of Horizon.
Non-Warranty Service
Should your service not be covered by warranty service will be completed and payment will be required without notification or estimate of the expense unless the expense exceeds 50% of the retail purchase cost. By submitting the item for service you are agreeing to payment of the service without notification. Service estimates are available upon request. You must include this request with your item submitted for service. Non-warranty service estimates will be billed a minimum of ½ hour of labor. In addition you will be billed for return freight. Horizon accepts money orders and cashiers checks, as well as Visa, MasterCard, American Express, and Discover cards. By submitting any item to Horizon for service, you are agreeing to Horizon’s Terms and Conditions found on our website http://www.horizonhobby.com/Service/Request.
United States:
Electronics and engines requiring inspection or repair should be shipped to the following address:
Horizon Service Center
4105 Fieldstone Road
Champaign, Illinois 61822
All other Products requiring warranty inspection or repair should be shipped to the following address:
Horizon Product Support
4105 Fieldstone Road
Champaign, Illinois 61822
Please call 877-504-0233 or e-mail us at productsupport@horizonhobby.com with any questions or concerns regarding this product or warranty.
United Kingdom:
Electronics and engines requiring inspection or repair should be shipped to the following address:
Horizon Hobby Limited
Units 1-4 Ployters Rd
Staple Tye
Harlow, Essex
CM18 7NS
United Kingdom
Please call +44 (0) 1279 641 097 or e-mail us at sales@horizonhobby.co.uk with any questions or concerns regarding this product or warranty.
Germany:
Electronics and engines requiring inspection or repair should be shipped to the following address:
Horizon Technischer Service
Hamburger Strasse 10
25335 Elmshorn
Germany
Please call +49 4121 46199 66 or e-mail us at
service@horizonhobby.de with any questions or concerns regarding this product or warranty. France:
Electronics and engines requiring inspection or repair should be shipped to the following address: Horizon Hobby SAS
14 Rue Gustave Eiffel
Zone d’Activité du Réveil Matin
91230 Montgeron Please call +33 (0) 1 60 47 44 70 or e-mail us at
infofrance@horizonhobby.com with any questions or concerns regarding this product or warranty.
Modified: 6/20/2011 Product Support
Media
 Everything you need to get... |  |  |  |  |  The AS3X flybarless system... |  Every excess gram has been... |  The mCP X comes equipped with... |  Comes with two 200mAh 1S 3.7V... |  Make your mCP X stand out... |
Videos |